d4rkm4n
-
Posts
76 -
Joined
-
Last visited
d4rkm4n's Achievements
-
Hi, I have no experience in this kind of configuration but this is what I found from manual. Mitsubishi Programmable Controllers Training Manual CC-Link IE Field Network (for GX Works3)
-
Yes, this should be it. With option to convert. Mine doesnt show this option so I proceed to convert using GOT type as post above. Not sure what the reason for the error.
-
Thanks for reply. I cant seem to find option to save as GOT2000. Btw, I have found a way to convert through GOT1000 by Common>GOT Type. Auto conversion is completed now.
-
Hi, I plan to replace my current GOT1000 to GOT2000. I tried to open GOT1k program using GOT2k to proceed with auto convert but got error as below: "This project data cannot be opened with the security key registered in the PC". I can open program with GOT1000 without any issue. Any idea? Btw, is there any other way I can convert if I can open using GOT1000? Thanks.
-
Sometimes I cant open thread. Hopefully this website will be here for sometimes. great resource of information.
-
Hi, Does it work before? If it does, try reinstall the driver and GXWorks2 application. Happened to me before.
-
Thank you for highlighting this! So focus on the error, I completely miss this was not same error. I will check further on the new error.
-
Bump. Still looking for solution for this issue.
-
Better to create separate rung to use the press and use internal bit to trigger the press ON/OFF. Make sure emg stop is function.
-
Hi, I have encountered error as per picture below: It happened after change of path for one drive location. I saved all PLC program on my One Drive. Is the anyway to rectify this error? Thanks.
-
Hi guys, I still looking for counter measure for this issue. =\
-
The manual mention there is reset button available: GT16 User's Manual (Hardware) (mitsubishielectric.com)
-
User-created simulation or actual PLC simulation? PLC simulation can only be done through GXWorks, no hardware required and I believe there no register to check for it. For user-created, you need to check the ladder.
-
I have checked for D54 and D55. Nothing else is using the register beside this conversion to be used at DINT.
-
Do you mean not related to SM722? Since I already disabled the error flag, it should be turn on for all right? Currently production is running, so cannot stop yet for now. Btw, I have tried to reset before, once reset, the error is gone, as long the machine is not running, the error is not coming, once start up, the error come.
