I want to connect plc FX3G-60MR/ES- with delta DOP-103BQ RS-485/RS-232

[SUB_2205]

I want to connect plc FX3G-60MR/ES- with delta DOP-103BQ  HMI with main port, and extended FX-BD-422 connect with DOP-110CS is it possible to connect via RS-485/RS-232 for main both ports and need its connection wiring pin configuration.   


thanks in advance.

[Crossbow]

The 422 port is meant for programming.  They do make an RS232 board or a 485 board you can put in place of the 422-BD.  The built-in port isn't meant for device communications.

[Nugro]

It may help

[SUB_2205]

Thanks,

But i want to configure plc with RS-232/RS-485 with hmi can it possible,  because the HMI-DOP com1 & com2 as (RS-422 & RS-485 is not possible) , and i want to keep HMI one com port to communicate with VFDs, here is an attchment please suggest.