Allen Bradley / Rockwell Automation
11,319 topics in this forum
-
- 0 replies
- 157.9k views
-
- 5 replies
- 5.9k views
-
- 1 reply
- 91 views
-
- 56 replies
- 21.4k views
-
- 5 replies
- 4.2k views
-
- 5 replies
- 191 views
-
- 3 replies
- 385 views
-
- 1 reply
- 223 views
-
- 1 reply
- 183 views
-
- 2 replies
- 562 views
-
- 6 replies
- 834 views
-
- 0 replies
- 371 views
-
- 3 replies
- 692 views
-
- 5 replies
- 1.2k views
-
- 1 reply
- 934 views
-
- 4 replies
- 1.3k views
-
- 2 replies
- 634 views
-
- 5 replies
- 1.2k views
-
- 1 reply
- 603 views
-
- 1 reply
- 251 views
-
- 3 replies
- 588 views
-
- 1 reply
- 129 views
-
- 1 reply
- 594 views
-
- 0 replies
- 501 views
-
- 3 replies
- 640 views
-
Posts
-
Im printer is looking for ASCII data as external input from PLC. Im only focusing on sending the data. Im not sure what you meant by start or end code. If you elaborate, that would be great -
The reason is that the ladder display is only for simple ladder, a structured project although compiles into the IL code some cannot be translated. -
-
-
By realisator · Posted
I was working only with NX-CIF210 but from what i see in your program You're not sending any start or end code in your frame - how does the communication frame look like for Your printer? Second thing I would rather use CTS/RTS flow control. -
Sure. DO you want tu use the simple motion mode ? Define it as RD78G4(S) in GX Works 3 https://www.mitsubishielectric.com/fa/service-support/global/e-learning/pdf/eng/4-SIMPLE_MOTION_Module_iQ-R_na_eng.pdf This is the e-learnign Here you can find them all https://www.mitsubishielectric.com/fa/service-support/global/e-learning/eng.html -
Hi, I'm actually new to GX Works 3 and want to do a virtual axis simulation. Does anybody knows what to do and how to do it? -
Hi Crossbow, There is no password in the program. And just found from the GOT monitor manual, there are points of limitations to display ladder in the hmi, one of them is about the ladder program type, should not be ladder with label (must be simple ladder) and no function block as Parky said. Now I have to re-write the ladder to simple ladder because no other way such as converter software. -
I found a manual that indicates that the files "SafetyCPU_IAG_7inch_RevD.iag" and "SafetyCPU_IAG_12inch_RevD.iag" also have monitoring functions, and those it says you have to get in contact with a representative to get, then I imagine I would need a Serial Number for a product for them to send me. If anyone has those would help me very much so. Thank you for pointing out that I needed the exact names! -
Alright, did some more research and the one I'm looking for is called "laddermonitor1.iag" I found it in another program but I can't seem to export it to the project I need it im. It seem to substitute the screens I had alredy in there and I want just the function inside. Managed to get everything together by saving my files separetely but its giving lots of errors and it does'nt seem to add anything to my ToolBox still. I downloaded the IAG files available on the OMROM site and theres nothing with the same name in there, maybe it's a selfmade IAG from the factory that gave me the base project, the only thing that bugs me is that the author of the IAG in the base project is OMROM, wich leads me to believe its a proprietary IAG from them, but thats the only thing. Have you seen this "laddermonitor1.iag" by any chance ?
-
I agree with Crossbow, the FX for example can only have one main task as default & no initial program so must be a A or Q series. so the I/O can only be 16 differences or 32 or 128 for example If card 0 & 1 was 16 way input 16 way output those would be X0-XF & card 1 would be X10 to X1F however, an FX with built in I/O you can have X0-7 & Y0 -7 for an 8 in 8 out
-
-
If it cannot read the programs from the PLC, then maybe the PLC or the program has a password? Or as Parky mentioned, if the program was written in Structured Ladder. Do you have a copy of the PLC project?
-